Versions available:

FAL502-220VAC:

FAL502-127VAC:

FAL502-125VDC:

FAL502-24V:

Stress of work of 220 VAC

Stress of work to 127VAC

Tension Workbook 125VDC

Stress of work 24VDC or 24VAC

Typical application:

Protection of sensitive equipment against outbreaks and sudden interruptions in voltage, noise.

Electrical Characteristics:

Tolerance of the voltage input: + / - 20% (24VDC, 24VAC, 125VDC, 127VAC, 220VAC)

Current maximum: 6A

Time of supervision: 100ms Time for rearme: 3s

Dimensions: 65mm width, height 90mm, 70mm Depth

Setting: Rail DIN35 in sheltered panel

Weight: 200g

Temperature of work: 0 to 85 ° C

Porta-fuse: Type bayonet, without contact with the fuse with various approvals

Fuses: Type rapid action Shurtter mark, approved

The plate FAL502 was developed according to the need to protect the equipment against sobretensão, noise

Electromagnetic and sudden failures in supply voltage for. It provides the following features:

1 Set of two door-fuses, which rupture in the event of a short or sobretensão. The FAL502 signals with red leds the status of the fuse;

2 An electromagnetic filter together with capacitors security Y2 for filtering noise;

3 Varistores to protect against sobretensão;

4 system supervision of the voltage input that monitors the same. In the event of a failure greater than 100 ms, FAL502 desarma the relay, switching and waits until the voltage input stabilise by more than 3 seconds. Oelemento under review is not the level of tension, but the presence or absence of it. It is known fact that certain equipment do not support well religamentos in successive short time, may present various defects in this function;

5 Signalling light indicating: tension of this entry; yellow led,output, led green; broken fuses, red leds.